Canales populares

Reducir el ruido del botton del mouse

Quiero compartir este tuto que arme con todos ustedes.


Reducir el ruido del botton del mouse

La idea básicamente es reducir el sonido de click de los botones del mouse, ya que a mi parecer son muy ruidosos y es muy molesto escuchar ese 'click' tan fuerte.

Afortunadamente la solucion es muy sencilla.

Les dejo un video que subi con los pasos para completar tal tarea.


El nivel es muy básico.

Les dejo el doc. con las instrucciones en ingles (Me da paja traducirlo )

What you'll need.
A mouse.
Soldering gun.
Soldering paste.
Some soldering removal.
Safety pin

First, start by disassembly the mouse

Open the case and proceed to disassembly the logic board.

Remove it from the case and localize the mouse buttons.

I'll recommend to desolder the buttons insted of trying to take
them directly from the board.

The buttons are a small pieces of hardware and they have to be treated with care.

Now that you localize the buttoin open it by unclip the plastic
holders in each side of the button. Use the safety pin.

Now look this picture

The button is simple a metal array with a mecanism that allow the
current flow at the time the button is pushed.

The blue dot represent the gap between the two metal pieces.

The trick is to reduce the gap between the two pices of metal
localized at the end of the button.

To do this, apply pressure to the top metal pice and reduce the gap just a little.

Be carefull or you may ruin the mecanism that bring the button up
when pressed.

When you think is enough, assemble the button and press it few times to
check the result. If you need to adjust the button again repeat the process.

When you feel satisfied by the sound and pressure, assemble and solder again.
Put the mouse together again and do a test.

If you feel that the mouse isn't clicking correctly, disassemble and repeat the process.

Good luck with your new mouse!
0No hay comentarios