Saab Aero Concept

Saab Aero Concept Technical Specifications

Sports Coupé two-seater format, monocoque steel construction
Rear opening cockpit canopy, carbon fiber bodywork

Front, longitudinally-mounted behind front axleSaab BioPower 2.8-litre V6 turbo. 24-valve, four OHC.All aluminium construction. E100 fuel. 12:1 compression ratio.VVT, exhaust and inlet. SIDI (Spark Ignited Direct Injection).
Twin VGT (Variable Geometry Turbine) turbochargers. 14.5 psi (1.0 bar) max. boost
Dry sump lubrication.Max. power: 400 hp @ 5,000 rpm (EEC)
Max. torque: 369 lb.ft. (500 Nm) @ 2,000 - 5,000 rpm (EEC)

Engine management:
32-bit, ignition timing, fuel injection, turbo boost pressure, air mass measurement, throttle setting. Secondary air injection for quick catalysts warm up

Seven-speed, automated manual transmission with double clutch system.Sequential gear changes via the steering wheel paddles.
All-wheel-drive through multi-plate clutch, variable front/rear torque split.

Front: Double wishbones, coil springs, elec.adj. dampers, anti-roll bar.
Rear: Multi-link, coil springs, elec. adj. dampers, anti-roll bar.

Saab Active Chassis: continuously adjustable damping control.

Rack and pinion, hydraulic power-assisted.

14.9-inch (380 mm) ventilated discs front/rear
ABS, MBA, EBD, electronic stability control.

Front: 22 x 9.0 inch, multi-spoke alloy / 265/30 mm
Rear: 23 x 11.5 inch, multi-spoke alloy / 325/25 mm

Kerb weight:
3,307 lbs. (1,500 kilos) (projected). F/R distribution: 50/50 percent

External dimensions:
Length: 184.1 in. / 4675 mmWidth: 75.5 in. / 1918 mmHeight: 50.2 in. / 1276 mmTrack: 62.9 in. / 1599 mm (f); 62.2 in. / 1579 mm (r)Wheelbase: 110 in. / 2795 mm

Performance (projected):
0 - 100 kph: 4.9 secs
Top Speed: 155 mph / 250 kph (limited)